Brush Cutter User Manual

-53-
143245 - Rotary Cutter 1020/1520 (30-March-2007)
Cylinders
122875 - Wing Lift Cylinder (with Internal Compression Spring) - 3” x 16” x 1-1/2”
122879 - Rod/Clevis - 1-1/2” x 16”
122881 - Piston, 3”
118441 - Lock Nut, 7/8 UNF
Unitorque
143500 - Spring, Compression
122556 - Cap, Open - 3” x 1-1/2”
122877 - Barrel, 3” x 16”
122558 - Lock Ring, 3”
118796 - Bolt, Shoulder - 1/2” UNC
118930 - Pin, - 1” x 2-13/16”
118924 -Flat Washer - .591” ID x .905” OD
118796 - Bolt, Shoulder - 1/2” UNC
118930 - Pin, - 1” x 2-13/16”
118924 - Flat Washer - .591” ID x .905” OD
122523 - Seal Kit
122850 - Center Height Control Cylinder (with Rephasing Grooves) - 3-1/2” x 8” x 1-1/4”
122834 - Rod/Clevis - 1-1/4” x 8”
122663 - Piston, 3-1/2”
118441 - Lock Nut, 7/8 UNF
Unitorque
122856 - Cap, Open - 3-1/2” x 1-1/4”
122852 - Barrel, 3-1/2” x 8”
122658 - Lock Ring, 3-1/2”
118796 - Bolt, Shoulder - 1/2” UNC
118930 - Pin, - 1” x 2-13/16”
118924 - Flat Washer - .591” ID x .905” OD
122857 - Seal Kit
2”
1”
1/2”
3/4”
122860 - Cylinder Stop Block Kit