User manual

LED MM-IP67 LED 150 W
Specifications
Dimensions: 217 mm × 67 mm × 41.8 mm
Efficiency Level: ErP Stage 2, CEC Level V
Marks / Approvals:
OUTPUT
MODEL
Voltage
Min. Load
Max. Load
Max. Power
Ripple & Noise
LED 12V150W-MM-IP67
12 V
0.0 A
12.5 A
150 W
440 mV p-p
LED 24V150W-MM-IP67
24 V
0.0 A
6.25 A
150 W
680 mV p-p
LED 36V150W-MM-IP67
36 V
0.0 A
4.17 A
150 W
1000 mV p-p
LED 48V150W-MM/IP67
48 V
0.0 A
3.12 A
150 W
1500 mV p-p
INPUT
Voltage
AC 90 V – 264 V
Frequency
47 Hz to 63 Hz
Current (rms max)
0.8 A max. (230 V) / 1.6 A (115 V)
Power Factor
230 V 50 Hz: >0.95 / 115 V 60 Hz: >0.98 (at 100 % load)
Inrush Current
75 A (at 230 V / 25 °C)
Leakage Current
1 mA max.
PROTECTION
Over Current
Protected, auto recovery
Overvoltage
Protected, turn off and restart
Short Circuit
Hiccup mode auto recovery
Isolation Resistance
50 MΩ min. (I/P-O/P, I/P-FG: 500 V DC, 25 °C, 70 % RH)
No Load Operation
Yes, to protect the power supply and system from damage
OTHERS
Cooling
Free air convection
Temperature Coefficient
± 0.05 % / °C
IP Rating
IP67
Setup Time, Rise Time
3000 ms, 80 ms
Efficiency
90 % min.
Withstand Voltage
DC 5300 V Primary – Secondary • DC 2700 V Primary – PE
Vibration
10 ~ 500 Hz, 5G 12min./1cycle, 30 min. each along X, Y, Z axes
Holdup time
230 V: 30 ms / 115 V: 10 ms
Environment
Temperature
Operating: -20 °C to 45 °C / Storage: -30 °C to 70 °C
Humidity
Operating: 20 % RH to 98 % RH / Storage: 10 % RH to 98 % RH
MTBF
352,000 Calculated Hours at 25°C, by MIL-HDBK-217F
SAFETY
EN 61347-1 / EN 61347-2-13
EMI / EMS
EN 55015 / EN 61000-4-2, -3, -4, -5, -6 -8, -11 / EN 55024 / EN 61547
Harmonic
EN 61000-3-2 CLASS C
Case Dimensions
217 mm × 67 mm × 41.8 mm
Specifications subject to change without notice
Features
■ Universal AC Input / Full Range
■ Built-In Active PFC Function
■ IP67 for indoor and outdoor installations
■ Suitable for LED Lighting and Street Lighting
■ Compliance to Safety Regulations for Lighting
■ 1 Year Warranty