Declaration of conformity

18. Declaration of Conformity and the CE Mark
There are three possible procedures pertaining to the declaration of conformity:
18.1 Conformity Testing and Declaration of Conformity by the Manufacturer or His
Authorized Representative Established within the Community or by an
importer.
-Article 10(1)of the EMC Directive,
-s 3(1) no.2a of the EMC Act.
18.2 Declaration of Conformity Issued by the Manufacturer or His Authorized
Representative Established within the Community or by an importer
following testing of the Product and issued of an EC certificate of conformity
by a competent body.
-Article 10(2) of the EMC Directive,
-s 3(1) no.2b of the EMC Act.
18.3 Declaration of Conformity issued by the Manufacturer or His Authorized
Representative Established within the community or by an Importer
following Testing and Certification of the Product by a Notified Body.
-Article 10(5) of the EMC Directive,
-S 3(1)no.2b of the EMC Act (radio transmitting installations)
18.4 Specimen For The CE Marking Of Electrical / Electronic Equipment
The components of the CE marking shall have substantially the same
vertical dimension, which may not be less than 5mm.
REIGN POWER CO., LTD.
Page Number
:
55
of
55
TEL:[phone]
lssued Date : Sep.20, 2010
FAX:[phone]