User's Manual

800 MINI SMART TV
TJ
SIMPLIFIED USER MANUAL
Please read the safety instructions in the
enclosed user manual before usage.
SAFETY INSTRUCTIONS FOR TJ800 MINI SMART TV
1、Please DO read the safety instructions carefully.
2、Please DO keep this manual property for future reference.
3、Please put this product on a stable and clean table before usage.
4、All the openings and slots on the product case are for ventilation
and heat dissipation to avoild component damage due to over-
heating, so do NOT cover or block these parts.
5、Do NOT place the power supply in places where it is easy to be
trod on,do NOT put any item on the power lines.
6、Do NOT pour any kind of liquid into this product, otherwise it may
suffer damage or circuitry burnout.
7、Do NOT place this product in the environment which temperature
is above 65 ℃ or below 0℃, otherwise it may be damaged.
8、Please do NOT put this product in the environment with high
humidity or dust.
9、Please contact professional personnel for further treatment if the
following conditions happen:
a、Power supply source damage;
b、Liquid infiltration into product case;
c、No reaction or black screen after power-on.
CHAPTER ONE BRIEF INTRODUCTION TO TJ800 TV
1.1 TV Front View ...........................................1
1.2 TV Rear View ...........................................2
1.3 TV Remote Control ...................................3
1.4 Power Supply
..........................................4
CHAPTER TWO COMMON ISSUES
2.1 Start-up ...............................................5
2.2 Outer Device
.........................................6
2.3 Operating System Introduction ..................7
2.4 Network Connection
................................8
2.5 Wireless keyboard, mouse, game controller and other extension parts 9
CHAPTER THREE WARRANTY AND AFTER-SALES COMMITMENT
3.1 TJ800 TV Warranty Commitment..............10
3.2 TJ 800 TV After-sales Commitment.................11
3.3 TJ800 TV Warranty Certificate and Qualification.11
CONTENTS
2.3 OPERATING SYSTEM INTRODUCTION
7
2.4 NETWORK CONNECTION
8
1、Turn on TV to enter the general Android system interface
2、Device setting
WIFI setting
1.2 TV REAR VIEW
1.3 TV REMOTE CONTROL
2 3
1、Power supply switch 2、System switch 3、USB—1
4、USB—2 5、HDMI signal input 6、Speaker
7、TF card slot 8、DC55X21 power socket
Number keyboard
System setting
Volume adjustment
Mouse mode
Return/Cancel
Direction control
Confirm
Menu(different menu shown based on APPs)
Return to desktop/Desktop switch
System standby
1.1 TV FRONT VIEW
1
1. Color/Monochrome adjustment
2. Volume adjustment
CHAPTER ONE BRIEF INTRODUCTION TO TJ800 TV
1.4 POWER SUPPLY
4
1、Corresponding power adapters are enclosed based on different coutries
or regions end users are located in.
2、Please DO note the power supply requirement if you want to bu y the
adapter by yourself or use a mobile power supply, this product may be
malfunctional or damaged if the voltage or current output by your power
supply is above or below the requirement.
Power supply requirement: A 9V/1.5A power supply should be applied to this
product, the plug specification should be DC 5.5mm X 2.1mm.
POWER SUPPLY DESCRIPTION
2.1 START-UP
① Standy: pull the power switch up to enter the standy mode.
CHAPTER TWO COMMON ISSUES
5
2.2 OUTER DEVICE
① HDMI video device connection: when the product is in the standby mode,
insert the HDMI wire of outer device into the HDMI socket in the back of the
product, boot up the connected device and pull down the system switch.
② If the screen keeps showing the standby image, please pull the system
switch again or reboot the TV and outer device.
Note: A few outer devices may not connect with this product normally due
to the compatibility issue between outer HDMI and USB devices, please be
noted that this is not the product’s fault or quality issue.
6
Pull up the power switch
Pull down the system switch
Pull up the power switch to enter the standy screen
Pull up the power switch
Pull down the system switch
Pull up the power switch
Outer HDMI device
② TV turn-on: pull up the switches of power switch and system switch,
after the snowflake animation is over and the Android system starts up,
the product is ready for use.
Product name Mini Smart TV
Product model TJ800
Outer dimensions 11.6X10.8X9.3
Weight 325g
Screen 3.5inch IPS HD LCD
Resolution ratio 640X480
System Android 7.1.2
CPU Amlogic s905w/4-core/2.0Hz
Speaker 4 Ω3W
Memory 2G
Product me mory 16G
WIFI IEEE 802.11 b/g/n
USB X2
HDMI input X1
Supporting 128GB maximum
Power supply DC6V/1.0A
TF card
2.5 WIRELESS KEYBOARD, MOUSE, GAME CONTROLLER
AND OTHER EXTENSION PARTS
9
① Keyboard and mouse: this TV supports most USB wi re d or wireless
Bluetooth keyboards and mouses, just insert the connector into the
TV’s USB socket.
② Game controller: this TV supports most USB wired or Bluetooth game
controllers(game controller needs to have built-in Bluetooth receiver),
for game controller’s usage and settings, please refer to its relevant user
manual and the setting descriptions in different APPs.
③ Mobile hard disk, U-disk, TF card: this product supports most mobile hard
disks, U-disks and TF cards, as for TF card, it supports 128G maximum.
Note: Some old USB devices may not work normally due to the
compatibility issue.
CHAPTER THREE WARRANTY AND AFTER-SALES COMMITMENT
10
3.1 TJ800 TV WARRANTY COMMITMENT
·TJ800 Mini TV and its enclosed accessories provide one-year warranty as of the
date of sale.
SCOPE OF REPAIR:
·No matter you purchase TJ800 TV through any sales channel, it provides
warranty service. You can contact retailer or customer service personnel via
logging on to the official website of Douzi Techonology Co., Ltd(douzitv.net).
THE WARRANTY EXCLUDES THE FOLLOWING CONDITIONS:
·Damages caused by natural disasters such as fire, earthquake, typhoon and so on;
·War, being used as an attack weapon, delibertately abuse or damage
·The tamper-proof label on the back of the product case being torn off
REPAIR APPROACHES:
·Repair or replacement is implemented based on specific faulty conditions, the
parts which can be repaired or replaced include, but not limited to, screen,
motherboard, speaker and so on.
·All the replaced parts, accessories or device should be brand-new.
·The replaced parts or accessories enjoy a warranty equal to the remaining
duration of the one-year warranty or 90 days after the replacement, the longer
one of the above-mentioned two periods prevails.
·Brand-new accessories should be used to replace if they have problems.
11
3.2 TJ 800 TV AFTER-SALES COMMITMENT
·Users can enjoy the lifetime after-sales service after the one-year
warranty expires.
3.3 TJ800TV WARRANTY CERTIFICATE AND QUALIFICATION
Product model:
Inspector:
Ex-factory date:
Qualification
Product model:
Retailer signature:
User signature:
Date of purchase:
WARRANTY CERTIFICATE
Device MAC code:
Company name: Yunnan Dehong Douzi Technology Co., Ltd
Company address: No. AS2-44, 2nd Floor, Xingchang Commercial
Plaza, Menghuan Neighborhood, Mangshi,
Dehong Prefecture, Yunnan, China
Pull down the
system switch
1
2
3
4
5
Link successful
FCC Statement
FCC StatementThis equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:-- Reorient or relocate the receiving antenna. --
Increase the separation between the equipment and receiver. -- Connect the
equipment into an outlet on a circuit different from that to which the receiver is
connected. -- Consult the dealer or an experienced radio/TV technician for
help.This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.Changes or
modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.The antenna(s) used
for this transmitter must be installed to provide a separation distance of at least
20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
12