User's Manual

P.14 User Guide
To put the system into Valet Mode
Using the KEY (Ignition Valet Mode):
1. Insert the ignition key into the ignition switch. Within 10 sec., cycle the
ignition key to the IGNITION/RUN and OFF positions 5 times until the
parking lights flash 3 times.
2. Turn the ignition OFF.
3. The LED on the antenna will stay ON indicating that the vehicle has
successfully entered Valet mode.
Using the TRANSMITTER (Remote Valet Mode):
1. Press and hold the and buttons simultaneously until the
remote beeps once, pauses, then beeps once again. Release the
buttons.
2. The and buttons will flash 3 times.
3. The LED on the antenna will stay ON indicating that the vehicle has
successfully entered Valet mode.
To take the system out of Valet Mode
Using the KEY (Ignition Valet Mode):
1. Insert the ignition key into the ignition switch. Within 10 sec., cycle the
ignition key to the IGNITION/RUN and OFF positions 5 times until the
parking lights flash twice.
2. Turn the ignition OFF.
3. The LED on the antenna will flash rapidly, indicating that the vehicle
is now out of Valet mode.
Using the TRANSMITTER (Remote Valet Mode):
1. Press and hold the and buttons simultaneously until the
remote beeps once, pauses, then beeps once again. Release the
buttons.
2. The and button will flash 3 times.
3. The LED on the antenna will flash rapidly, indicating that the vehicle
is now out of Valet mode.