User Instructions

© 2004 Directed Electronics, Inc. Vista, CA
2255
This wire supplies a 200mA output during engine cranking for additional starter wire(s).
This wire supplies a 200mA output when remote start ignition is active.
rreemmoottee ssttaarrtt sseeccoonnddaarryy hhaarrnneessss ((HH33)) wwiirree ccoonn--
nneeccttiioonn gguuiiddee
This wire supplies a 200mA output as soon as the module begins the remote start process. It can be used with
a relay to disconnect a sensor from the system as shown below. This wire can also be used as a rear defogger
trigger. This output can be programmed as a pulsed output.
This wire MUST be connected to hood pinswitch. This input will disable or shut down the remote start when the hood
is opened. It will also trigger the security system if the hood is opened while the system is armed and report Zone 6.
HH33//22 GGRRAAYY ((--)) hhoooodd ppiinnsswwiittcchh iinnppuutt,, zzoonnee 66
SENSOR TRIGGER OUTPUT
SENSOR INPUT OF SYSTEM
(+) 12V FUSED
CUT
85
86
30
87
87A
DIA-141
H3/1 BLUE STATUS
OUTPUT
HH33//11 BBLLUUEE//WWHHIITTEE ((--)) ssttaattuuss//ddeeffooggggeerr oouuttppuutt
PPIINNKK ((--)) 220000mmAA 33
rrdd
iiggnniittiioonn oouuttppuutt
PPUURRPPLLEE ((--)) 220000mmAA ssttaarrtteerr oouuttppuutt