User Instructions

3377

release the Valet®/Program button. Press it twice and release it to advance to Channel Three. Then press it once

more and

HHOOLLDD

it. The siren will chirp three times to confirm it is ready to receive the code from the transmitter.

Learn Routine™ will be exited if:

■ Ignition is turned off.

■ Door is closed.

■ Valet®/Program button is pressed too many times.

■ More than 15 seconds elapses between steps.

One long chirp indicates that Learn Routine™ has been exited.

ttrraannssmmiitttteerr ccoonnffiigguurraattiioonnss

The transmitters can be programmed with the standard or custom configurations by using the

Transmitter/Receiver Learn Routine.

A remote that uses the standard configuration operates similarly to many factory keyless entry remotes. A stan-

dard configuration transmitter allows arming, disarming, and Panic Mode activation with separate buttons. When

programmed for standard configuration, the transmitter buttons are assigned to the following functions:

.................................operates...........................Arm/Lock,

Panic ON/Panic OFF

.................................operates...........................Disarm/Unlock,

/Panic OFF

.................................operates...........................Start

.................................operates...........................Channel 2—trunk

release

and ................operate............................Timer Mode

ssttaannddaarrdd ccoonnffiigguurraattiioonn