Congratulations Congratulations on the purchase of your state-of-the-art security/keyless and remote start system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many features. For more information please visit us online at: www.automatecarsecurity.com. For any additional questions please contact your authorized Directed dealer or Directed at 1-800-753-0600. Additional support is also available at: http://support.directed.
Important information Government Regulations and Safety information Read the Government Regulations and Warning! Safety First sections of this manual prior to operating this system. Warning! Failure to heed this information can result in death, personal injury or property damage and may also result in the illegal use of the system beyond its intended purpose. Your warranty Your system comes with a warranty.
Contents Congratulations .................................................................................................i What’s included.................................................................................................i Important information ........................................................................................ ii Your warranty........................................................................................... ii Replacement Remote controls ........................
Valet take-over ........................................................................................20 Power saver mode ..........................................................................................20 Diagnostics (security only) ................................................................................21 Arming diagnostics .................................................................................21 Disarming diagnostics ...........................................................
Getting Started System maintenance The system requires no speciic maintenance beyond battery replacement for the remote controls. The 2-way remote control is powered by a 1.5V AAA battery. The LCD displays a battery level indicator which has three bars indicating the current charge level of the battery. When the battery reaches a low charge level that requires replacement, the remote control generates a single notiication sound, and the battery level indicator lashes continuously.
LCD 2-way Remote Control Front View Side View Antenna Function Button Display AUX Command Buttons Feature Description Internal Antenna Used for transmitting and receiving information Display Text field - the upper portion of display - shows the Clock, Remote Start Runtime or Temperature. Status screen - the lower portion of the display contains status icons for the System, Siren/horn, Alarm zones, Remote Start and Remote Control.
Control Center Button Antenna LED The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: • • • The In-vehicle system antenna: for 2 way communication. The control center LED: a visual indicator of the system’s status. The control center button: for placing the system into Valet Mode* and to perform the Emergency Override* operation. * See Remote and System Operations section for details.
Display icons 4 5 6 7 8 3 1 2 AM PM 24 23 22 A 21 SAVE 20 9 10 11 12 19 INHIBIT 18 17 16 13 14 15 6 © 2010 Directed Electronics. All rights reserved.
Item Description 1 Vehicle Interior Temperature Indicator 2 Numeric Display 3 AM/PM Indicator 4 Alarm Clock Mode Indicator 5 Timer Function Indicator 6 Transmission Indication 7 Transmit Range Indicator 8 Power Saver Mode Indicator 9 Vibrate/Beep Mode Indicator 10 Temperature-Controlled Remote Start Indicator 11 Vehicle Page Mode Indicator 12 Full Trigger Shock Sensor Indicator 13 Hood/Trunk Open or Trigger Indicator 14 Parking Light Indicator 15 Door Open or Trigger Indicator
Basic Commands Note: Button coniguration also applies to the 1- way remote control. Arm/lock Press and release The alarm arms, doors lock (if connected), and the siren/horn sounds and parking lights lash once. If Valet mode* is On, the doors lock and the arm/lock indicator** is displayed. Exit Valet mode to arm/lock the alarm normally. To Arm/lock and Panic Press and hold The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds the siren/horn and lashes the parking lights.
controls: . Remote start Press and release Activates (or if On, deactivates) the remote starter. The engine and parking lights turn On. LCD backlighting Press and release ** LCD backlighting turns on. To enter adjustment mode Press and hold When held for more than ive seconds the remote enters adjustment mode allowing the setting of the clock, timer mode, and audible melody selection. For more information, see Advanced Commands section or refer to the expanded version of this manual online at www.
Advanced Commands Note: Button coniguration also applies to the 1- way remote control. Additional auxiliary functions. Press and buttons simultaneously Activates an optional auxiliary convenience or expansion function that you have added to your system. The auxiliary output controls Press and buttons simultaneously Activates an optional auxiliary convenience or expansion function that you have added to your system.
two times and the rear defogger is no longer active when the vehicle is remote started. When the same procedure is repeated, the defogger activates and the parking lights lash three times. If the vehicle interior temperature is greater than 55°F when the remote start is activated, the rear defogger does not turn on. Temperature Start mode Press and and buttons simultaneously Activates the Temperature Start mode. The parking lights lash fast four times to conirm activation.
Activates the parking timer. Each additional press toggles through the available options (10 min., 20 min., 30 min., 1 hour, 1.5 hours, 2 hours, and off). Beep/vibrate notiication Press and buttons simultaneously (2-way only) Toggles between beep notiication and vibrate notiication. Power Save Press and buttons simultaneously (2-way only) Activates battery saver mode. Reduces power consumption on the remote control battery when the alarm is inactive or disarmed/unlocked.
Remote operation The remote start system operates at 434 MHz and incorporates Directed’s proprietary A.S.K. out-board two-way remote. The high frequency combined with Binary Data communication achieves superior range with two-way communication. Paging features The control module sends a page to the remote as conirmation of a received command, or alarm system status.
Remote and System operations Passive arming/locking The system can be programmed to arm/lock itself automatically (called passive arming/locking). If the system is programmed for passive arming/ locking, it will automatically arm/lock 30 seconds after the ignition is turned off and the system detects that you have left the vehicle by opening and closing a door.
information about icons and the zones they represent refer to the Button Coniguration and Icons description section in the expanded version of this manual online at www.automatecarsecurity.com. Triggered response (security only) A Triggered Response can be activated by any of the triggers listed below and consists of an alarm page along with the response described for each trigger. The default Triggered Response duration is 30 seconds but can be programmed from 1-180 seconds by your installer.
• The full trigger alert icon (28) will turn on for 15 seconds. Multi-level security arming (security only) Multi-Level Security Arming allows you to select which of the system’s inputs or sensors will be active and which will be bypassed when the system is armed. For more information, please refer to the expanded version of this manual online at www.automatecarsecurity.com Arming while driving (security only) Your security system can be armed while driving the vehicle.
To disarm/disable the system: 1. Turn the ignition to the ON position. 2. Press the control center button the preset number of times (one to ive times) within15 seconds (the factory default setting is 1 press). After ive seconds, the system will disarm/disable. If the system does not disarm/disable, you may have waited too long. Start over by turning the ignition off and on.
The status LED lights solidly if you are entering Valet Mode, and goes off when you exit Valet Mode. Remote start This feature allows you to remotely start and run your vehicle for a programmable period of time. This makes it possible to warm up the engine, as well as adjust the interior temperature of the vehicle with the climate control system.
When you are ready to drive the vehicle: 1. 2. Insert the ignition key and turn it to the On position. Press the brake pedal. Note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down.
Valet take-over The Valet Take-Over feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the motor running and the climate controls on. To perform Valet Take-Over: 1. Before turning off the engine, press and release on the remote control (or press and release the optional momentary switch). Then wait ive seconds. 2.
Diagnostics (security only) The microprocessor at the heart of your system is constantly monitoring all of the switches and sensors connected to it. It is designed to detect any faulty switches and sensors and prevents them from disabling the entire system. The microprocessor will also record and report any triggers that occurred during your absence. Refer to the Table of Zones sections of this guide for diagnostic information.
Table of zones A zone is represented by the number of LED lashes used by the system to identify a particular type of input. Standard input assignments are listed in the following table, along with spaces to write in any optional sensors or switches that have been installed.
Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
Warning! Safety First The following safety warnings must be observed at all times: Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. When properly installed, this system can start the vehicle via a command signal from the remote control/transmitter. Therefore, never operate the system in an enclosed area or partially enclosed area without ventilation (such as a garage).
After the remote start module has been installed, contact your authorized dealer to have him or her test the remote start module by performing the Safety Check outlined in the product installation guide. If the vehicle starts when performing the Neutral Safety Shutdown Circuit test, the remote start unit has not been properly installed. The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear.
Patent Information This product is covered by one or more of the following U.S.
Español Guía del propietario
Felicitaciones Felicitaciones por la compra de su sistema de arranque a distancia y entrada sin llave con tecnología de vanguardia. Leer la guía del propietario antes de utilizar el sistema maximiza la implementación y las diversas características del sistema. Hay más información en www. automatecarsecurity.com. Si tiene preguntas, comuníquese con el distribuidor autorizado de Directed, o con Directed llamando a 1-800-753-0600. También hay apoyo adicional en http://support.directed.com.
Información importante Reglamentos del gobierno e información de seguridad Lea las secciones Reglas del gobierno y ¡Advertencia! Seguridad primero de este manual antes de hacer funcionar el sistema. ¡Advertencia! No seguir estas instrucciones puede causar muerte, lesiones personales o daños a la propiedad. También puede causar ilegalidad por usar el sistema para objetivos no previstos. Garantía Su sistema viene con una garantía.
Contenido Felicitaciones .....................................................................................................i Contenido .........................................................................................................i Información importante ...................................................................................... ii Garantía ................................................................................................. ii Reemplazo de controles remotos..............
Transferencia de control al valet ...............................................................20 Modalidad de ahorro de energía .....................................................................21 Diagnóstico (sólo seguridad) ............................................................................21 Diagnóstico de armado ...........................................................................21 Diagnóstico de desarmado ......................................................................
Inicio Mantenimiento del sistema El sistema no requiere mantenimiento especíico, fuera de cambiarles las pilas a los controles remotos. El control remoto bidireccional tiene una pila de 1.5 V tipo AAA. La pantalla LCD tiene 3 barras para indicar la carga de la pila. Cuando la pila se gasta al punto en que hay que cambiarla, el control remoto genera un solo sonido de aviso y el indicador de pila destella continuamente.
Control remoto bidireccional con pantalla LCD Vista delantera Vista lateral Antena Botón de funciones Pantalla AUX Botones de comando Característica Descripción Antena interna Para transmitir y recibir información Pantalla Campo de texto, parte superior de la pantalla, muestra el reloj, la duración del arranque a distancia o la temperatura.
Centro de control Botón Antena Indicador LED El centro de control está por lo general en la parte de arriba del parabrisas delantero e intercambia comandos o mensajes con el sistema. Consta de lo siguiente: • • • La antena de sistema interna del vehículo: para la comunicación bidireccional. El indicador LED del centro de control: indicador visual del estado del sistema.
Iconos de pantalla 4 5 6 7 8 3 1 2 AM PM 24 23 22 A 21 SAVE 20 9 10 11 12 19 INHIBIT 18 17 16 13 14 15 6 © 2010 Directed Electronics. Reservados todos los derechos.
Ítem Descripción 1 Indicador de temperatura interior del vehículo 2 Pantalla numérica 3 Indicador AM/PM 4 Indicador de modalidad de reloj con alarma 5 Indicador de la función de temporización 6 Indicación de transmisión 7 Indicador de alcance de transmisión 8 Indicador de modalidad de ahorro de energía 9 Indicador de modalidad de vibración o pitido 10 Indicador de arranque a distancia controlado por temperatura 11 Indicador de modalidad de llamado al vehículo 12 Indicador del sensor
Comandos básicos Nota: La coniguración de botones también se aplica al control remoto unidireccional. Armado o bloqueo Oprima y suelte el botón La alarma se activa, las puertas se bloquean (si están conectadas), la sirena o el claxon suena y las luces de estacionamiento destellan una vez. Si la modalidad de valet* está activada, las puertas se bloquean y aparece el indicador de armado o bloqueo.** Salga de la modalidad de valet para armar o bloquear la alarma normalmente.
Función opcional (apertura de maletero) Oprima y mantenga oprimido el botón Activa la salida auxiliar, que puede ser la apertura del maletero o una función auxiliar que usted le haya agregado al sistema. La salida auxiliar controla: . Arranque a distancia Oprima y suelte el botón Activa (o si está activado, desactiva) el arranque a distancia. El motor y las luces de estacionamiento se encienden.
Comandos avanzados Nota: La coniguración de botones también se aplica al control remoto unidireccional. Funciones auxiliares. Oprima el botón y el botón simultáneamente. Esto activa una función auxiliar que usted le haya agregado al sistema. La salida auxiliar controla Oprima el botón y el botón simultáneamente. Esto activa una función auxiliar que usted le haya agregado al sistema. La salida auxiliar controla Oprima el botón y el botón simultáneamente.
mismo procedimiento, el desempañador se activa y las luces de estacionamiento destellan 3 veces. Si la temperatura interior del vehículo es más de 55 °F cuando se activa el arranque a distancia, el desempañador trasero no se activa. Modalidad de arranque por temperatura Oprima el botón el botón y el botón simultáneamente. Activa la modalidad de arranque por temperatura. Las luces de estacionamiento destellan rápidamente 4 veces para conirmar la activación.
Temporizador de estacionamiento Oprima el botón y el botón simultáneamente. (sólo bidireccional) Activa el temporizador de estacionamiento. Cada vez que se oprimen los botones se pasa a la siguiente opción disponible (10 min., 20 min., 30 min., 1 hora, 1.5 horas, 2 horas y desactivado {Off}). Aviso de pitido o vibración Oprima el botón y el botón simultáneamente. (sólo bidireccional) Pasa del aviso con pitido al aviso con vibración y viceversa.
Operación a distancia El sistema de arranque a distancia funciona a 434 MHz y tiene un control remoto bidireccional fuera de borda A.S.K. propiedad de Directed. La alta frecuencia combinada con la comunicación de datos binarios permite largo alcance en la comunicación bidireccional. Características de llamado El módulo de control llama al control remoto para conirmar que ha recibido un comando o un estado de sistema de alarma.
Operaciones a distancia y de sistema Armado o bloqueo pasivo El sistema se puede programar para que se arme o se bloquee automáticamente (esto se llama armado o bloqueo pasivo). Si se programa para armado o bloqueo pasivo, el sistema se arma o se bloquea automáticamente 30 segundos después de que se pasa la llave a la posición de apagado (OFF) y el sistema detecta que usted ha salido del vehículo abriendo y cerrando una puerta.
• • Aviso de control remoto. 10 pitidos rápidos (o una vibración). El control remoto entra en la modalidad de reconocimiento de llamado y hace funcionar las alertas de llamado de alarma. Nota: Los iconos 12 y 13 representan entradas de zona del sistema de alarma. Para obtener más información sobre los iconos y las zonas que representan consulte la sección Coniguración de botones y descripción de iconos en la versión larga de este manual en www. automatecarsecurity.com.
• • Activación desde el maletero. Abrir el maletero (si está conectado) produce instantáneamente el sonido de la sirena o el claxon y las luces destellan durante el período programado. Se emite un reporte de Zona 4. Activación desde el encendido. Pasar la llave a la posición de encendido (ON) produce la misma respuesta progresiva que la activación desde la puerta. Se emite un reporte de Zona 5.
Desarmado de alta seguridad (sólo seguridad) Este sistema de seguridad ofrece desarmado de alta seguridad. El desarmado de alta seguridad es una característica que permite silenciar y restablecer el sistema sin desarmarlo mientras está en proceso de activación. Consulte la versión larga de este manual en www. automatecarsecurity.
Modalidad de valet La modalidad de valet permite evitar que el sistema se arme o se bloquee y emita activaciones automáticamente. Esto es muy útil cuando se está lavando el vehículo o cuando se le está haciendo servicio. En la modalidad de valet, la anulación de arranque no se arma ni se habilita, ni siquiera con el control remoto, pero todas las funciones de conveniencia (bloqueo de puertas, apertura del maletero, etc.) siguen funcionando normalmente. Para entrar o salir de la modalidad de valet: 1.
vehículo a distancia. ¡Advertencia! (1) No arranque nunca el vehículo con las llaves puestas, excepto cuando esté haciendo una transferencia de control al valet (Valet® Take-Over) y (2) No arranque nunca el vehículo si no tiene la palanca de marchas en la posición de estacionado (P) o neutro (N) Para arrancar el vehículo a distancia: • Oprima el botón del control remoto una vez. • Las luces de estacionamiento destellan para conirmar que el vehículo está intentando arrancar.
Nota: Si el pedal de freno se pisa antes de que la llave esté en la posición de encendido (ON), el motor se apaga. Cuando el vehículo está funcionando durante la operación de arranque a distancia, el sistema vigila el vehículo y apaga automáticamente el motor si se da alguna de las siguientes situaciones: • • • • • Se pisa el pedal del freno. Se abre el capó. El interruptor de apagado se pone en la posición de apagado (OFF). El período de funcionamiento preestablecido (12, 24 ó 60 minutos) se acaba.
Modalidad de ahorro de energía El sistema entra automáticamente en la modalidad de ahorro de energía mientras esté armado o bloqueado o en modalidad de valet después de un período en que no se haga ninguna operación. Consulte la versión larga de este manual en www.automatecarsecurity.com Diagnóstico (sólo seguridad) El microprocesador en el núcleo del sistema vigila constantemente todos los interruptores y sensores que tiene conectados.
mando, el sistema de seguridad fue activado en su ausencia. Si suena 5 veces cuando se desarma, una de las zonas se activó tantas veces que el Circuito de Protección contra Molestias (Nuisance Protection® Circuitry) la pasó por alto. Consulte la versión larga de este manual en www.automatecarsecurity.com Tabla de zonas Las zonas se representan por el número de destellos del indicador LED con que el sistema identiica las señales de activación.
Por ejemplo: Si la zona 3 estuvo activa o se activó, el indicador LED parpadea 3 veces con una pausa de 2 segundos. Luego vuelve a parpadear 3 veces y lo repite hasta que la llave se pase a la posición de encendido (ON). El sistema recuerda las dos últimas zonas activadas. Si el sistema se ha activado pero el indicador LED se ha restablecido pasando la llave la posición de encendido (ON), sigue siendo posible que el distribuidor recupere las dos zonas que se activaron.
Reglamentos del gobierno Este dispositivo cumple con la Parte 15 del Reglamento de la FCC. Su funcionamiento está sujeto a lo siguiente: (1) este dispositivo no debe causar interferencia perjudicial y (2) este dispositivo debe aceptar toda interferencia, incluso la que pueda causar funcionamiento no deseado. Este equipo ha sido sometido a pruebas y se ha determinado que cumple con los límites establecidos para un dispositivo digital Clase B, en conformidad con la Parte 15 del Reglamento de la FCC.
Advertencia: Los cambios o modiicaciones no aprobados expresamente por el fabricante pueden anular la autorización del usuario para hacer funcionar este dispositivo. ¡Advertencia! Seguridad primero Las siguientes advertencias de seguridad se deben respetar en todo momento. Debido a la complejidad del sistema, sólo un distribuidor autorizado de Directed debe instalar este producto. Cuando se instala correctamente, este sistema puede arrancar el vehículo por medio de una señal desde el control remoto.
mente la característica de seguridad neutral del vehículo, que le impide al vehículo arrancar a distancia cuando tiene puesta una marcha. Sólo un distribuidor autorizado de Directed debe hacer esta prueba, según la veriicación de seguridad estipulada en la guía de instalación del producto. Si el vehículo arranca con una marcha puesta, suspenda inmediatamente el arranque a distancia y consulte al distribuidor autorizado de Directed para arreglar el problema.
Información de patentes Este producto está cubierto por una o varias de las siguientes patentes de Estados Unidos: 303,223 345,711 4,383,242 5,103,221 5,534,845 5,907,195 333,633 347,190 4,438,426 5,117,217 5,572,185 5,914,667 333,634 348,622 4,553,127 5,132,660 5,646,591 5,945,936 333,635 352,685 4,584,569 5,193,141 5,656,997 5,952,933 333,636 383,689 4,794,368 5,245,694 5,712,638 5,990,786 333,795 383,690 4,887,064 5,285,186 5,783,989 340,000 390,830 4,897,630 5,315,2