T W O - W A Y 6 - B U T T O N L C D A U T O M A T I C / M A N U A L T R A N S M I S S I O N R E M O T E S T A R T E R AS-3472TW-FM User Guide WARNING It is the responsibility of the vehicle operator to ensure their vehicle is parked in a safe and responsible manner. 1. a) Manual transmission: When leaving the vehicle, it is the user’s responsibility to ensure that the gearshift lever is in the NEUTRAL position and the parking brake is engaged in order to avoid accidents upon remote starting.
Table of Contents Introduction ............................................................ 2 Ignition Relock .................................................. 13 Using the Transmitter............................................ 3 Secure Lock ...................................................... 13 LCD Remote Functions ...................................... 3 Remote Trunk Release..................................... 13 Vehicle Presets.......................................................
Using the Transmitter Your remote starter is equipped with a 5-button multi-channel remote control. It can operate two independent vehicles equipped with identical remote starters (see Multi-car operation section, later in this Guide, for second-car transmitter functions). LCD Remote Functions The transmitter offers several command-confirmation and timer features. This section explains some of the key functions available.
Backlight Button Press for < 1 second Backlight ON for 3 sec. Press for > 3 seconds and < 5 seconds Backlight ON for 3 sec. Press for > 5 seconds Backlight will stay ON until button is released. Selecting and adjusting Menu options: When in MENU, press button to enter the menu. Press Press button to move up in the menu or button to move down in the menu. button to select the option you would like to adjust.
8 LCD On Menu LCD on time 9 Clock Menu Clock hour Clock minute 10 Temperature Menu Temperature 11 Language Menu Language 12 Side button Menu 13 colors LCD OFF 01 OFF 15 OFF 30 OFF 60 ON CLOCK 12:00 12 is flashing. 12:00 00 is flashing. TEMP CTEMP Or FTEMP LANGU ENG Or FRAN SBPRO PANIC STOP TEMP AUX 2 CWM F Button Function Menu FBPRO FB programming 123M 231M 213M 312M M123 1 min., 15 min., 30 min., 60 min. and ON 1 min. is default.
Secure Remote feature: This feature is used to lock the keypad of the transmitter to avoid accidental button press. When the remote is locked and a button is pressed, the LCD displays “PRESF” for 1 second, then goes back to the clock. The transmitter keypad can also be locked as follows: • Press to go to Menu. • Within 3 seconds, press • Press . for about 1 second to unlock the transmitter keypad. LCD ON menu: If there is no activity within the programmed time, the LCD will turn off.
Button trunk) L --02 → Start button(2nd car start) L --03 → Lock button (Channel 1) L --03 → Unlock button (Channel 2) L --03 → Trunk button (Channel 3) L --03 → Start button (Channel 4) LCD Beep(s) START text for 1s 1 beep 1 beep 1 beep 1 beep 1 beep Vehicle Presets Heater & Heated Seat When leaving the vehicle it is recommended to preset the accessory controls in preparation for the next remote start.
- If remote door locks are installed, this will also lock the doors and arm the OEM-style alarm. • To disarm the Starter Kill, press the UNLOCK button on the transmitter. - The parking lights will flash twice. - The LED on the antenna will remain OUT. - If remote door locks are installed, this will also unlock the doors. Remote-Starting Your Vehicle If your vehicle has an automatic transmission, simply press the START/STOP button to remote start or stop your vehicle.
If the vehicle does not start at the first attempt, the system will shut down, wait a few seconds and try to start the engine again. If your vehicle is equipped with an automatic transmission, there will be 3 start attempts before the system gives up. Driving Off With the vehicle running under remote control, press the UNLOCK button to disarm the Starter Kill and/or the OEM-style alarm (if installed) and unlock the doors. Enter the vehicle and do the following: 1.
• Remote valet: • Valet switch: This feature allows you to put your system into Valet Mode by using the transmitter. This feature allows you to put your system into Valet Mode by using a push button switch (optional). To put the system i n t o Valet Mode • To put the system i n t o Valet mode using the KEY (Ignition Valet Mode): a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times successively into the IGNITION/RUN and OFF positions.
The LED on the antenna will flash quickly to indicate that the vehicle is now out of Valet mode. The icon will appear on your LCD transmitter if you press LOCK or UNLOCK. The system will warn you if someone attempts to start your vehicle while it stands in Valet Mode: The transmitter will beep twice. The START/STOP and LOCK buttons will flash twice. The parking lights will: Turn ON then OFF; then Flash twice.
L-01 will appear on the display. Within 3 seconds, press and hold the button for at least 3 seconds. icon The remote control will beep once, then once again when the disappears. The parking lights flash once. To verify whether the system is in Cold Weather Mode (automatic transmissions only): • Press the brake pedal: • If the vehicle is in cold weather mode, the parking lights will stay on while the pedal is pressed.
• To arm the OEM-style alarm, press the LOCK button on the transmitter. - The OEM-style alarm will ONLY arm if the LOCK button on the transmitter is pressed. - The LED on the antenna will flash slowly to indicate that the OEM-style alarm is now armed. • To disarm the OEM-style alarm, press the UNLOCK button on the transmitter.
Installer-programmable Valet Mode “Home ValetTM” Mode If configured at installation, this feature will set the vehicle to a no-remote-start mode: if the vehicle is parked indoors, there is no danger of it starting accidentally by remote control. Note: Once the home valet mode is activated, the vehicle will not start by remote but the OEM alarm functions will still be enabled. To take the system i n t o home valet mode: • Press the or button. • Within 3 seconds, press the and buttons simultaneously.
How to Access to Runtime Status (Indication purpose only) Function By pressing Icon Gasoline Engine runtime Diesel 3 minutes 8 minutes 15 minutes 20 minutes 25 minutes 30 minutes Temperature Request (If ACC-Temp-101 installed) The user can request the temperature in the vehicle if a Temperature Sensor Module (ACC-Temp100) is installed: o Press the button for 1 second and release; you will hear a beep. L-01 will appear on the screen. o Immediately press the LCD screen.
Press + simultaneously: .................................................. LOCK Press + simultaneously:................................................... UNLOCK Press + simultaneously: ................................................................... START Press + simultaneously: ................................................... STOP Press : ........................................................... TRUNK Press :..........................................................
Missing a Start or a Stop Confirmation If you have not received a Start or the Stop confirmation after pressing the button, simply press button. Pressing the button will refresh the display and will confirm if the vehicle was the started or stopped. No Start Confirmation Was Received: If after remote starting the vehicle no confirmation was received, simply press the button, this will refresh the display. If the vehicle was started successfully, the icon will appear as well as the run time countdown.
: customized feature 3 : customized feature 4 Accessing the Multi-Level Features and Other Transmitter Functions To access a Level 1 feature, press and release the button and you will hear a “beep”; L-01 will be displayed. This display means that you are now in Level 1. Simply press the corresponding button to access the desired feature. To access a Level 2 feature, press and release the button and you will hear a “beep’’; L-02 will be displayed.
Troubleshooting Transmitting Range Many factors may affect the operating range of the transmitter. Some of these are: • • • • • • • • The condition of the battery in the transmitter. The operating environment (for example: downtown radio-frequency noise, airports, cellular phone towers…). Metal: any type of metal will affect operating range. This includes the vehicle itself. The shape of the vehicle can affect range as well (vans in general have less range).
LIMITED LIFETIME WARRANTY REMOTE STARTERS AND ALARM SYSTEMS: As the manufacturer, 4366859 Canada Inc.