User's Manual

6
T
y
c
o
C
O
N
F
I
D
E
N
T
I
A
L
Mount the reader module directly to the backplate and then snap the front
cover in place as indicated in Figure 2.
FIGURE 2. Mounting Assembly
(including 1 optional isolation spacer)
INSTALLATION CONSIDERATIONS
An isolation spacer (available from Software House, part number
SWH-ISOSPC) may be used to improve the read range distance when
mounting the reader to a metal surface. To optimize reader range use the
number of backplates as indicated in Table 2. Use of Isolation Spacers is
optional and not required for non-metal mounting surfaces.