User's Manual
Table Of Contents
- Contents
- Figures
- Figure 1: GE Contactless Smart Card Reader Model 240 1
- Figure 2: GE Contactless Smart Card Reader Model 245 2
- Figure 3: GE Model 24x Reader Backplate (includes tamper switch magnet) 3
- Figure 4: Isolation Spacer 4
- Figure 5: GE Model 24x Backplate and Snap-on cover 7
- Figure 6: Back-to-Back/Center-to-Center Installation 8
- Figure 7: GE Model 24x Reader Wiring Diagram to Micro/5 8RP 12
- Figure 8: Model 24x Smart Card Reader Wiring Diagram to J-Box 13
- Figure 9: GE Model 24x Reader to 2RP 14
- Figure 10: GE Model 24x Reader to 8RP 16
- Figure 11: GE Model 240x Reader to Micro 18
- Figure 12: Stripping of Shield Grounds 23
- Product Overview
- Installation
- Troubleshooting
- Technical Specifications
This document contains proprietary information of General Electric
Company, USA and is furnished to its customer solely to assist that
customer in the installation, testing, operation, and/or maintenance of
the equipment described. This document shall not be reproduced in
whole or in part nor shall its contents be disclosed to any third party
without the written approval of GE Industrial Systems.
GE PROVIDES THE FOLLOWING DOCUMENT AND THE
INFORMATION INCLUDED THEREIN AS IS AND WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED STATUTORY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR PARTICULAR
PURPOSE.
This publication may contain examples of screen captures and reports
used in daily operations. Examples include fictitious names of individuals
and companies. Any similarity to names and addresses of actual
business enterprises and persons is entirely coincidental.
Copyright 2003 GE Interlogix, CASI
All rights reserved.
Printed in the U.S.A
The Model 240 and 245 Smart Card Readers are trademarks of GE
Interlogix-CASI Division.
MIFARE
®
is a registered trademark of Philips Electronics, N.V.
WARNING
This is a Class A product. In a domestic environment, this product
may cause radio interference, in which case, the user may be required
to take adequate measures.