ed Sen Reh Introduction Congratulations on your purchase of Red Sea's 3-in-1 Prefatory smart Reef Aquarium ATO system, plus temperature monitor and leak detector. The Prefatory is designed to maintain a stable salinity and water volume in a reef aquarium by automatically replenishing the water lost due to evaporation. The Prefatory consists of a slimline, multi-input, solid-state water level sensor, bespoke DC pump, WI-fi connected controller and a complete set of accessories required to install the system.
Safety PLEASE READ AND FOLLOW ALL SAFETY INSTRUCTIONS THIS DEVICE IS INTENDED FOR INDOOR USE ONLY. DANGER: To avoid possible electric shack, special care should be taken when handling a wet aquarium, For each of the following situations, do not attempt repairs yourself; return the appliance to an authorized service fatality for service or discard the appliance.
ed Sen Reh LED Indicators Settings LED Indicator: + Solid Red light Controller is connected to the home-network. Blinking Red light Controller is in WI-Fi Access Point (AP) mode (can be discovered by WI-Fi devices). + Rapid Blinking Red fo Controller cannot access the home-network (network name and/or password are incorrect or known network has become unavailable] + No Red light Controller WI-Fi is off. Double blink indicates change of status / end of process.
How the Prefatory Auto-Fill system works During regular operation when Auto Fill ls robed, the water level will be maintained within the 3mm / 1/8" band between the pump-on and pump off probes of the ATO sensor.
ed Sen Reh 12 Introduction to the Reef Beat app All Red Sea's connected devices are operated via the Reef Seat app which must be installed on a mobile device with an internet connection (including tablets), See the full list of supported mobile devices on our website. Through your personal user account on the cloud, Reef Beat enables you to set up and manage any number of aquariums and add multiple devices to each of them.
For Red Sea aquariums click the sensor holder onto the glass triangle located in the return pump chamber. For older systems that have the gravity fed float valve, remove the valve by unscrewing the nut that old it in place and then click the sensor holder onto the glass triangle. For non-Red Sea sumps, attach the sensor holder to the magnetic comer bracket that will ensure that the sensor is always vertical, The external magnets are waterproof and can be mounted on internal walls of the sump.
ed Sen Reh 14 Using the silicone tube provided, connect the water outlet of the ATO pump to the tube holder that should be attached to the top rim of the sump chamber where the sensor is located. To ensure a secure connection make sure that the tube is cut straight and at 90 degrees to the tube, push the tube over the hose-barb until it is touching the securing nut and screw the nut counter-clockwise over the tube.
i Locate the leak detector at a convenient point around the outside of the aquarium and secure in position with the eff-adhesive Velcro pads, or with screws. Thread the cable of the leak detector through the cabinet and connect to the leak detector port of the controller. Installation of the leak detector is optional and will not affect the operation of the ATO system if it is not installed.
ed Sen Reh 16 Select your preferred network and wait a few moments while the controller connects to it. The indicator LED will now be a solid red. Follow the instructions on the app for initial settings. If you have set the aquarium to Offline, select the “Direct Mode” option at the top of the screen to skip the network connection. The indicator LED will continue to blink as the controller WI-Fi remains in AP mode.
Temperature monitor Notification ranges The Prefatory homepage presents the current temperature and a green/ amber/red status indicator according to the desired and acceptable temperature ranges that you define for your system. If the temperature goes above or below the acceptable range you will get a notification {o your mobile device.
ed Sen Reh 18 Water changes or sump maintenance Whenever you undertake any activity that will temporarily lower the water level in the sump and/or cause water near the leak detector, you should do one or mare of the following to prevent the Prefatory from automatically “topping-of” or setting off the leak alarm.
Firmware Updates From time to time, you may receive a notification that a new firmware version is available for your device. It is important to keep your device firmware updated to ensure compatibility with updates to the Reef Beat App. Individual units can be updated: Device manager > Device line menu > Firmware Update. To update all units simultaneously: Device manager > Device type menu > Firmware update Do not unplug a device while it is downloading and installing the new firmware.
ed Sen Reh 20 Device Maintenance Controller For continued smooth running of the controller, we recommended making sure that it is kept clean, dry, and free of any buildup of salt despoils on a regular basis. The unit Is not waterproof. Do not submerge in water or other solutions. ATO level /temperature sensor Make sure that the sensor is kept free of any build-up of organic waste, algae growth, or salt deposits on a regular basis. The sensor is waterproof and can be safely washed under running water.
Troubleshooting Full and up to date FAQ for the Prefatory and the Reef Beat app Is available in the app (Homepage Main Menu> Help> FAQ) and on our website. Q. | am having trouble installing the Reef Beat App or it crashes or does not seem to be working as described in the manual. A. Check that your specific mobile device is on the list of supported devices on our website. Q. My mobile is on the list of supported devices but keeps crashing. A.
ed Sen Reh 22 Warranty Red Sea Products Limited Warranty, Thank you for purchasing a Red Sea REEFER DC-Skimmer upgrade kit (hereinafter “the Product”). Red Sea Aquatics (UK) Ltd. (hereinafter “Red Sea”} warrants the Product against manufacturer's defects in material and workmanship for 2 years from your date of purchase. Pump impellers are a wear item and as such Red Sea warrants the impellers against manufacturer's defects in material and workmanship for 6 months from your date of purchase.
CE Declaration of Conformity: The equipment complies with the RF Exposure Requirement 2014/53/ EU, Council Recommendation on the limitation of exposure of the general public to electromagnetic fields (0-300 GHz). This equipment meets the following conformance standards: EN 300 328, EN 301 489-17. DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. This product must not be disposed together with the domestic waste.
Red Sea USA FE £200 Houston, pT EUs Ee Se [TEST 555 Rue des Fires Lumiere 27130 Vellum Fa pre Box 1237 Cheddar, BS2759AG ULE E) Germany & Austria [SET] free] eo) prep EEE] fun alr cr Fol Block 2-4, No.
