User's Guide

www.dejero.com
12 | Dejero EnGo 3x User Guide
Battery error, but the EnGo is running on auxiliary power. For more
information, select > Warning.
Battery error. For more information, select > Warning.
Charge the EnGo
When the battery is low, you must charge the EnGo. Charge the battery in EnGo fully prior to
using it for the first time.
Note: The battery might not charge if the temperature is below 10° C / 50° F or above +45° C /
113° F, or if it has encountered a problem that caused the battery to fail.
Charge the EnGo using a power outlet
Note: Use only the power adapter that is included with the EnGo 3x. You cannot use the power
adapter from an EnGo hardware version 1.3 or earlier to charge the EnGo 3x.
1. Connect the one end of the power cord to its power adapter.
2. Connect the power cord that is connected to the power adapter to the DC IN port on the side
of the EnGo.
3. Plug the other end of the power cord into a power outlet.
About the Power button settings
The Power button on the EnGo provides information about the charging or battery status of the
EnGo.
Light setting Description
No light The EnGo is off. If it is connected to an external power source, the
internal battery is fully charged.
Solid blue light The EnGo is on and the battery is charged to greater than 20%.
A solid blue light also appears if the EnGo is on and connected to an
external power source. If the EnGo is off, the external power source is
still charging the battery.