User's Guide

www.dejero.com
19 | Dejero EnGo 3x User Guide
d. Connect the power cable to the DC IN port on the EnGo.
10. Close the top of the backpack. As you close the top, ensure that the Wired Remote and
power cables lay inside the foam channels at the top of the backpack. The foam should rest
on the EnGo 3x, not the cables.
Note: You must secure the EnGo in the backpack with the zip cords. If you do not, the EnGo can
move around or fall out.
Use the EnGo inside the backpack
When the EnGo is inside the backpack, you do not need to remove it to view the screen or
interact with it.
Tip: When using the EnGo outdoors, you can use the sun shade to make viewing the screen
easier.
1. Open the cable storage compartment.
2. Remove the ends of the IFB and SDI cables from the compartment.
3. Connect these cables to the external cables that you use to connect to your external camera
or IFB system feeds. The external camera and IFB cables are not provided with the
backpack.
4. Ensure that the IFB and SDI connections lay inside the cable storage compartment and then
close the compartment.