User's Guide

www.dejero.com
22 | Dejero EnGo 3x User Guide
4. Use the hook-and-loop fasteners to open the slot in the bottom of the cable storage
compartment.
5. Pull the SDI cable into the backpack through the slot in the cable storage compartment.
6. Gently separate the foam spacer from the back of the backpack and pull it forward.
7. Pull the SDI cable through the channel in the foam spacer and remove it from the backpack.
8. Route the HDMI cable behind the foam spacer, ensuring that the end of the cable that
connects to the EnGo fits under the notch at the bottom of the foam spacer.
9. Ensure that the HDMI cable, as well as the IFB and power cables, fit inside the channel in
the foam spacer.
10. Align the hook-and-loop fasteners on the foam spacer with the back of the backpack,
ensuring that the bottom of the foam spacer is fully inserted into the bottom of the
compartment.
11. Press the foam spacer against the back of the backpack.
12. Route the HDMI cable through the slot in the cable storage compartment, ensuring that it fits
into the top compartment in the same way that the SDI cable did.
13. Use the hook-and-loop fasteners to close the slot in the cable storage compartment tightly.
14. Close the cable storage compartment.
15. Reinsert the EnGo into the backpack, ensuring that the zip cords fit around the endcaps to
secure it in place.