User's Guide

www.dejero.com
23 | Dejero EnGo 3x User Guide
About the Preview screen
When the EnGo is on, the Preview screen appears.
You can use the Preview screen in portrait or landscape mode. By default, the screen appears
in landscape mode. For more information on changing the display orientation, "Setting the
display orientation" on page .
The Preview screen is the hub of the EnGo transmitter. The top half of the screen shows the
live camera feed, as well information about the power level, network connections, stream health,
and any errors. From the menu, you can transfer files or show transmitter settings, error
messages, and connection details. For a list of possible error messages, see "Warning and
error messages" on page .
You can use the menus and buttons to access the features of the EnGo:
● Go Live button: Use this button to start a live transmission. The current live stream profile
appears below the Go Live button. When you select the button, the Preview screen shows
the live stream run time below the button, and the stream connection health and the latency
above the button.
● Record button: Use this button to record clips. The current quality setting appears below the
button. When you select the Record button, the Preview screen shows the clip run time
below the button. Above the button, the screen shows the amount of remaining video time
that you can record and store in the device storage.
● Live Menu: Use this menu to select the settings for your live transmission.
● Record Menu: Use this menu to set the quality of your recorded clips.
Note: If you are using the EnGo in GateWay Mode, GateWay Mode appears as the status below
the Go Live and Record buttons.