User's Guide

www.dejero.com
24 | Dejero EnGo 3x User Guide
Your Control administrator must assign the transmitter to a receiver output destination before
you can use it to go live. If your administrator has not assigned the transmitter, an error
appears. Your administrator can also change the Store and Forward Clip upload or File upload
receiver destination using Control and the available quality settings for clips. If any settings are
not available, a message appears with the quality setting in the Record Menu.
Change the settings for a live transmission
1. On the Preview screen, select the Live Menu button.
2. Select Feed, Auto, or User.
Live feed settings
Setting Description
Feed Use the Feed profile to send video to the station in poor network conditions. You
can also use Feed when you have time to send the highest quality video or when
recording live events without anchor desk and reporter interaction.
Auto Use the Auto profile to adapt to network conditions. It increases latency as
needed.
User Use the User profile if you set the configuration options manually. For more
information, see "Configuring the EnGo" on page .
Set the quality of recorded clips
1. On the Preview screen, select the Record Menu button.
2. Select 2.5 Mb/s, 4.0 Mb/s, 6.0 Mb/s, 12.0 Mb/s, 15.0 Mb/s, or 30.0 Mb/s.
About network connection icons
The following icons appear on the Preview screen to show the status of the EnGo connections.
The icons also appear on the screen when using Control to manage the EnGo remotely.
Icon Description
Ethernet connection
CellSat connection