User's Guide

www.dejero.com
26 | Dejero EnGo 3x User Guide
After changing the SIM module, select which SIMs to use. For more information, see "Define the
SIM set" on page .
Warning: Do not force the module into the EnGo. If it does not insert easily, remove it and check
that you inserted the replacement module in the correct way. Forcing the module can result in
damage to the SIM module or the EnGo.
Change the SIM cards in the accessible SIM module
Note: The SIM cards only fully insert and remain locked if they are oriented correctly.
1. Power off the EnGo.
2. Remove the SIM module from the EnGo by loosening the thumbscrews and pulling out the
module.
3. Remove the SIM cards by pushing the SIM card in gently. The SIM card will spring out.
4. If necessary, pull the SIM card the rest of the way out of the slot.
5. Place a SIM card into the slot in the SIM module correctly, with the notch on the SIM card
inserted first.
6. Gently push the SIM card into the slot, until it locks into place. If the SIM card is inserted
incorrectly, it does not insert all the way.
7. Repeat steps 3 through 6 for each slot.
8. Insert the SIM module with the end marked TOP oriented toward the Preview screen.
9. Line up and tighten the thumbscrews. Ensure that the module is aligned correctly and tightly
connected.
Note: After changing the SIM cards, select which SIMs to use. For more information, see "Define
the SIM set" on page .
Configuring the EnGo
Use the Settings screen to configure the transmitter settings.
Note: When you are streaming live content, you cannot configure the settings for the EnGo.