User's Guide

www.dejero.com
30 | Dejero EnGo 3x User Guide
Note: To prevent using higher resolutions over a cellular connection, an administrator might set
the maximum live resolution allowed for an EnGo in Control. When a restriction is added, the
resolution is stepped down automatically to the maximum allowable resolution when the
connection type is set to Modems or All. If the connection type is set to Ethernet, the maximum
live resolution setting in Control is ignored. The administrator can also use Control to set the
maximum connection bitrate.
1. On the Preview screen, select .
2. Select More.
3. Select Settings.
4. Select Live.
5. Select Resolution.
6. Set the live resolution to Auto: SD, Auto: SD+, Auto: HD, Auto: HD+, Auto: HD+20, Auto:
UHD, or Manual.
7. If you set the live resolution to Manual, perform the following actions:
a. Select Back.
b. Select Bit Rate.
c. Set the maximum connection bitrate.
EnGo monitors the available bandwidth and adjusts the transport resolution automatically to
give you the best possible video quality under the current network conditions. The receiver
output resolution does not change, so the video routed to your internal systems remains
constant.
Each Auto option has a different maximum bandwidth cap, appropriate for the base video
resolution that you send.
Live Resolution Maximum Connection Bitrate
Auto: SD 2.5 Mb/s
Auto: SD+ 5.0 Mb/s
Auto: HD 5.0 Mb/s
Auto: HD+ 10.0 Mb/s
Auto: HD+20 20.0 Mb/s