User's Guide

www.dejero.com
31 | Dejero EnGo 3x User Guide
Auto: UHD 60.0 Mb/s
Audio-only mode
In situations of limited bandwidth, when the available bandwidth falls below the threshold
required for usable video quality, EnGo automatically sends only audio to the receiver and the
last good frame of the video remains on the screen. When the bandwidth increases above the
required threshold, EnGo resumes sending video.
Note: The thresholds change depending on the number of audio channels selected; more audio
channels result in higher thresholds.
Configure the latency
Latency is the time that it takes for the video to arrive at the receiver. Glass-to-glass refers to
the delay from the time the camera detects an image to the time that it appears on a video
monitor connected to the Dejero receiver.
Tip: In an area of poor coverage, or very high cellular network traffic, you might achieve better
video transmission results with a medium or long latency.
1. On the Preview screen, select .
2. Select More.
3. Select Settings.
4. Select Live.
5. Select Latency.
6. Select a latency value: 0.5 s, 0.8 s, 1.2 s, 1.5 s, 2.2 s, 3.0 s, 8.0 s or Custom.
7. If you select Custom for the latency value, type a latency value between 0.5 seconds and
20.0 seconds.
8. Select .
9. Select Back.
10. Select Latency Mode.
11. Select a latency mode: Fixed, Adaptive, or Up to.