User's Guide

www.dejero.com
32 | Dejero EnGo 3x User Guide
Note: If you engage a satellite connection as part of the CellSat service, the EnGo must use a
latency of greater than 1.5 seconds. If the latency is set to less than 1.5 seconds, the EnGo
changes the latency to a short latency (1.5 s).
Latency settings
Setting Description
Fixed Latency
mode
In Fixed Latency mode, the system attempts to give the glass-to-glass
latency requested. If the current network conditions cannot support the
configured latency, a warning appears on the screen.
This setting is ideal when a known latency is preferred.
Adaptive Latency
mode
In Adaptive Latency mode, the system measures the network conditions
during the stream and gradually adjusts the requested latency upwards to
a value that is supported by the current conditions.
This setting is ideal when picture quality is the priority.
Up to Latency
mode
In Up-to Latency mode, the system measures the network conditions
during the beginning of the stream and provides the shortest possible
latency available. If the conditions worsen during the stream, EnGo
gradually increases the latency up to the maximum latency that you set.
When EnGo reaches the maximum latency, the latency remains fixed at
the specified value.
This setting is ideal when the lowest possible latency is the priority.
Configure Auto Start
You can use Auto Start to initiate a live transmission automatically when you power on EnGo
and it detects video input. You can also specify a delayed start for the live transmission.
1. On the Preview screen, select .
2. Select More.
3. Select Settings.
4. Select Operation.
5. Select Auto Start.
6. Select your delay setting: No delay, 1 minute, 2 minutes, 3 minutes, 4 minutes, or 5
minutes.