User's Guide

www.dejero.com
43 | Dejero EnGo 3x User Guide
8. Select .
Note: There is a limit on the number of PUK attempts. If you exceed this limit, the SIM is no
longer usable.
Turn off roaming for a connection
In some regions, you might be able to manage roaming settings for each cellular connection
that the EnGo has. By default, roaming is turned on, so connections roam on to any available
cellular network. If this option is configured for your EnGo, you can turn roaming off for
individual connections.
1. On the Preview screen, select .
2. Select More.
3. Select Settings.
4. Select Connections.
5. Select a connection.
6. Select Actions.
7. Set the Roaming field to No.
When roaming is turned off, an X appears over the signal strength indicator for a connection
that is roaming.
To turn on roaming again, set the Roaming field to Yes. If roaming is on for a connection, on
the Connections screen, an R appears with the signal strength indicator for that connection.
Transmitting live
Connect to cellular networks automatically
When the transmitter is on and set to either All or Modems as the connection type, it
automatically connects to all available cellular connections.
Start a transmission
After you connect your camera to the transmitter, you can start a transmission.
Prerequisite: Confirm that the latency settings as indicated on the Go Live button are
appropriate for the transmission. For more information, see "Configure the latency" on page .
1. Select Go Live.
You can monitor the video feed as it transmits.