User's Guide

www.dejero.com
44 | Dejero EnGo 3x User Guide
Switch to a CellSat connection
During a live transmission, you can switch to a CellSat connection, if one is available.
1. In the Start CellSat dialog box, perform one of the following actions:
● To start using the CellSat connection, select Yes.
● To check your connections first, select No.
Note: If you want to use the CellSat connection after checking your connections, on the Preview
screen, select Start CellSat. Select Yes.
Stop a transmission
1. On the Preview screen, select Stop.
2. Select Yes.
The Preview screen continues to show the input from the camera. The device remains ready to
resume broadcasting. To resume the transmission, select Go Live.
If you switched to a CellSat connection, the EnGo disconnects the CellSat connection when you
stop the transmission.
Tip: After you finish transmitting, always charge your EnGo battery.
Enabling stream encryption
You can encrypt the audio and video streams (including IFB and Intercom) sent between an
EnGo and supported Dejero receivers using AES 256 encryption. By default, stream encryption
is off but you can enable it by setting a preferred stream encryption mode in Control.
1. In a browser, type control.dejero.com.
2. Log into Control.
3. Click Manage > Sources.
4. Perform one or more of the following actions:
● Beside the Quick Filter field, click . Select a status and type.
● In the Enter filter terms field, select or type the source name, station name, source type,
status, source serial number, software version, or station callsign.
5. Click the EnGo.