Specifications

61
Disable ClearSound - ClearSound uses a technology that gives a better sound when you
don't scratch, at the expense of a very small delay when you scratch. When playing certain
types of heavy tremolo music pitch changes with the DVS can cause artifacts in the sound
quality.
Disable AntiSkip – uses a technology that will
ensure that VirtualDJ will not skip even if your
needle skips on your record. Skipping of a
DVS control vinyl can occur do to various
reasons, if minor skips occur while using the
DVS control vinyl, VirtualDJ will compensate
for the minor occurances. This feature can
typically be disabled (checked) if using DVS
control CDs.
Pitch Sensibility – The Pitch Sensibility is
used to adjust how much the pitch slider in
VirtualDJ should follow the turntable speed. If
set too low, the pitch slider will take some time
to adjust. If set too high, the pitch slider will
move when you just want to
scratch.\n(remember, with the Timecode
technology, a software has no clear way to
know the difference between a disc turning
faster because of the turntable's pitch being
moved, or because of the disc being nudged
or scratched. both result in the timecode signal
coming faster.)
Lead Time – Adjusts how much lead time is
used on the vinyl before the start of the song.
This is used so that VirtualDJ can track
timecode movement before the actual start of
the song.
Save capture … – Use this button to save a .bmp file of your config. You can then upload this
image on www.virtualdj.com forums if you need to ask for help to configure/optimize your
timecode signal.
TIMECODE SETUP
–
DEBUG