Replacement Part List

9
30SD, 36SD, 45SD
Rev. Jan 2016
Assembly Instrucons
Step 1: Control Panel Handles
1. Align the two holes on each side of the control panel
handles over the lower handle frame.
2. Insert the bolts through the handlebar holes and frame
holes. Secure in place with hardware provided. Insert
bolts from the inside.
3. Connect the headlight wiring harness to the
engine wiring harness.
Need Help With Assembly?
1-919-550-3259
Step 2: Direconal Discharge Chute
1. Fit the black plasc round spacer onto impeller
housing before installing chute.
2. Install the bolts for the retainer brackets with the
plasc spacer between the chute and the steel
retaining tabs.
DO NOT OVERTIGHTEN. If the bracket is too ght the
chute will not move properly. Ensure there is enough
space between the impeller housing and the bracket on all
sides so that the chute rotates smoothly.