Users Manual Part 8

Appendix B
9. Push down on the syringe plunger to
pressurize the vial.
10. While still holding the syringe, flip the vial over
so the vial is on top, slowly pull down on the
plunger to fill the syringe.
11. Fill the syringe with the amount of Remodulin
(mL) that is displayed on the remote.
12. With the needle facing up and held vertically,
tap on the syringe to remove any air bubbles.
13. Remove the syringe from the vial.
Follow the Remodulin manufacturer's
instructions for use and handling.
DKPI-09153-001-Rev. 1.4 251