User's Manual

D EKOLINK W IRELESS L TD . C OMPACT B I -D IRECTIONAL A MPLIFIER D EKO 3178B P RODUCT M ANUAL
Pub. 300TC80031 Rev. 1.55 Proprietary Data Page 13
3
33
3 INSTALLING THE
INSTALLING THE INSTALLING THE
INSTALLING THE DUAL BAND BDA
DUAL BAND BDADUAL BAND BDA
DUAL BAND BDA
3.1 U NPACKING
Upon receiving the Deko3178B unit, perform the following:
1. Examine the shipping container for damage before unpacking the unit.
2. Perform a visual inspection to reveal any physical damage to the
equipment.
3. Verify that all of the equipment (listed below) is included. Otherwise
contact Dekolink Wireless Ltd.
The Deko3178B Dual Band BDA is shipped with the following equipment:
• Deko3178B Dual Band BDA - Model: MW-CBDA-SMR700-800-16W80
• Key (used to lock the Dual Band BDA case)
• AC supply cable [6 ft.]
• User Manual (CD)
• Packaging box
3.2 R EQUIRED T OOLS AND M ATERIALS
A standard professional tool box is required in order to mount the Deko3178B Dual Band
BDA Mounting the Deko3178B
To mount the Dual Band BDA on the wall
1. Choose the location of the Dual Band BDA on the wall according to the following
criteria:
• The location should be at normal eye level height, above ground.
• Make sure that there is enough room to allow the door to swing completely
open, and to enable easy access to the Dual Band BDA for maintenance and on-
site inspection.
2. Mark the drilling holes on the wall surface based on the Dual Band BDA four
mounting holes. See following figure.