User's Manual

P RODUCT M ANUAL C OMPACT R EPEATER D EKO 3178B D EKOLINK W IRELESS L TD .
Page 14 Proprietary Data Pub. 300TC80031 Rev. 1.55
Figure 7. Deko3178B Mounting Holes
3. Drill the four holes in the wall.
4. Align the chassis so that the mounting brackets fit into the holes drilled in the wall.
5. Use tire bolts, hex-head bolts, and M8 washers to secure the enclosure firmly to the
wall.
Note: Bolts and Washers are not supplied with the Dual Band BDA.
3.3 D RY C ONTACT A LARM C ONNECTIONS
The front panel Alarm port (see 1.3.1) is an optional dry contact alarm port that
supports two alarm connections from external sources (incoming outputs). The use of
relay alarms (open or short wire-pair circuit) is recommended for the external alarms
port.
Figure 8. Alarm Connector Pinout
Mounting hole
x 4