Installation Manual

DEKOLINK WIRELESS LTD. PRODUCT MANUAL IDEN REPEATER
1.5.3 Mechanical Specifications
The following table provides the mechanical specifications of the iDEN Repeater.
Element Value
Size H x W x D 400 x 400 x 260 mm (16 x 16 x 10.3 inch)
Weight Approximately 25 kg. (55 lbs.)
1.5.4 Connectors
The Repeater interfaces with a Base antenna port and a Mobile antenna port. It
includes four external connectors in its bottom panel, as described below.
Connector Type
RF Connectors:
BASE / MOBILE
N-type, Female
AC Circular, 3-pin
Alarms Circular, 8-pin
1.5.5 Environmental Specifications
Dekolink’s iDEN Repeaters meet the European IP65 and American NEMA4
weatherproof standards. The Repeater is designed to operate properly under the
following environmental conditions.
Condition Value
Operating temperature
- 30° C to + 50°C
Storage temperature
- 50° C to + 80°C
Pub. 307-2005 Rev. 1.0 Proprietary Data Page 3