Installation Manual

DEKOLINK WIRELESS LTD. PRODUCT MANUAL IDEN REPEATER
5.5 REPEATER INITIALIZATION PROCEDURES
To initialize and setup the iDEN Repeater parameters, proceed as follows:
3. Turn on the Laptop or the PC (for remote configuration)
4. Activate the RMT from the Start menu or by double clicking the Repeater
Management icon on your desktop
1. The following startup screen is displayed.
2. Click on the Temp Unit button as follows. Make sure that the “Repeater PN"
is correct (Please refer to the RMT User's manual to set the required PN).
3. Click on the Connect button as follows.
Pub. 307-2005 Rev. 1.0 Proprietary Data Page 19