Installation Manual

IDEN REPEATER PRODUCT MANUAL DEKOLINK WIRELESS LTD.
4. The following Connection screen is displayed. To select the mode of
operation for configuration, proceed as follows:
5. After accessing the Repeater, the Password window appears. Enter the
Repeater’s password (the default password for the repeater is "password".
Click OK.
password
6. The main setup screen is displayed. It consists of three sub-screens accessible
by clicking on the appropriate tab: Repeater Alarms / Params and Control /
Configuration. The Repeater PN is provided on the right-most upper area for
identification of the Repeater.
7. First verify the Repeater identification data in the Configuration screen as
shown below. Confirm that the data is correct. Enter the Server Phone
number and change Unit Password if necessary.
Page 20 Proprietary Data Pub. 307-2005 Rev. 1.0