Installation Manual

DEKOLINK WIRELESS LTD. PRODUCT MANUAL IDEN REPEATER
1. INTRODUCTION
1.1 GENERAL
Dekolink’s iDEN Repeaters are frequency range selective amplifiers that amplify
signals bi-directionally between mobile phones and base stations, in cellular and other
wireless mobile telephone systems. The iDEN Repeaters can be monitored locally or
remotely via Dekolink’s Windows-based Network Management System - RMT
software (Refer to the RMT Software User's Guide for more information).
1.2 APPLICATIONS
Dekolink’s iDEN Repeaters help solve area coverage problems:
Extended coverage for rural and isolated areas •
•
•
•
•
•
•
•
•
•
Improved in-building coverage
Hole filler application whenever there is no coverage of a
particular spot in the cell site (due to terrain topography or
urban structures that shadow areas)
Cell extension to improve the coverage of an existing cell
1.3 FEATURES
Some of the of the Dekolink iDEN Repeaters' features are listed below:
4W composite output power
90 dB RF gain
Flexible, software controlled, bandpass filter center
frequency (for partial bandwidth models)
High spectral purity
Local and remote monitor and control (software enabled)
Relatively small dimensions
1.4 MODELS AND FREQUENCIES
Dekolink’s iDEN Repeater can be provided in several models, as per customer
requirements. The frequency range is defined as follows:
Repeater
Type
Model Number Downlink
(MHz)
Uplink
(MHz)
iDEN Fixed
Frequency
Range
MW-CSR-ESMR-25W90-XXX-YY Series
where:
(1) XXX =Uplink Low Frequency (MHz)
(2) YY = Bandwidth
851-869 806-824
iDEN Variable
Center
Frequency
MW-CSR-ESMR-25W90-YY Series where:
(1) YY = Frequency Range Bandwidth
851-869 806-824
Pub. 307-2005 Rev. 1.0 Proprietary Data Page 1