User Manual
Table Of Contents
- INTRODUCTION
- FUNCTIONAL DESCRIPTION
- DESCRIPTION
- INSTALLATION
- REPEATER MANAGEMENT TOOL (RMT)
- OPERATION
- MAINTENANCE AND TROUBLESHOOTING
- APPENDIX A: MECHANICAL OUTLINE
- APPENDIX B: ALARMS AND LEDS
- APPENDIX C: INSTALLING THE REPEATER IN A LABORATORY SETTING
- APPENDIX D: MODEM INSTALLATION (OPTION)
- APPENDIX E: DEKOLINK WIRELESS LIMITED WARRANTY
DIGITAL REPEATER PRODUCT MANUAL DEKOLINK WIRELESS LTD.
3.3 MONITOR MODULE AND CONTROLLER DESCRIPTION
3.3.1 Monitor Module
The Monitor Module monitors the Repeater operation. It provides local feedback on
some Repeater main modules operation. It issues a visual warning status through the
LEDs on its top enclosure whenever it detects a failed module or function.
This module monitors the DC power supply by performing DC Current and Voltage
measurements. The monitoring is performed by measuring the current of several
elements:
DDF Uplink and Downlink, •
•
•
Up/Down Converter,
Uplink Power Amplifier
If a monitored element fails, the appropriate red LED lights up. The Monitor Module
transmits the alarm status to the Control Box Module, which controls the Digital
Repeater functions and detects operating failures.
Note
For a detailed description of the LEDs and the error messages, refer to
Appendix B – Alarms.
Figure 3: Monitor Module – Front Panel
Page 10 Proprietary Data Pub. 302-2004 Rev. 2.0