Installation & Assembly

HELPFUL TIPS

1/2” Forstner Bit

(1.27 cm)

TOOLS NEEDED

Follow the appropriate building and electrical codes when

installing all DEKOR® lighting products.

It is recommended to determine placement of lighting under

dark conditions prior to drilling/installation.

» DO NOT use more than one transformer on each circuit.

» To ensure all components are in working condition it is recom-

mended to have power source attached and on when installing

lights.

Have Questions? Call 1–800-258-0344

NOTE: Construction methods are constantly changing. For the most up-to-date installation instructions visit: www.DEKORLIGHTING.com

Polarity Key

Power Drill

features, or add safety to the exterior of your home. These versatile lights can be used indoors and out. They are waterproof, very

durable, and backed by a 10 year warranty.

For more information call 1.800.258.0344, or connect to our responsive chat messenger at dekorlighting.com.

includes:

EZ Plug-N-Play Transconnector Cable (20 ft)

EZ Transformer

EZ Indoor Timer

T-Splitters

10 ft Cables

5 ft Cables

120VAC to 12VDC

Transformer

EZ Indoor Timer

DEKOR Transformer

Transconnector Cable (20 ft)

CAUTION:

When making a connection between

a Plug-N-Play connector or a splitter;

observe the polarity key to make the proper connection.

MUST MATCH UP. Do not force the connectors together.

Plug-N-Play connectors are waterproof, but if there is

constant exposure to water, use of dielectric grease is

mandatory at all connections. Dielectric grease should be

added prior to connection.

T-Splitter

1/2” Forstner Bit

(1.27 cm)

Exterior Wall

PAGE 1
features, or add safety to the exterior of your home. These versatile lights can be used indoors and out. They are waterproof, very durable, and backed by a 10 year warranty. For more information call 1.800.258.0344, or connect to our responsive chat messenger at dekorlighting.com. 1/2” Forstner Bit (1.27 cm) T-Splitter 120VAC to 12VDC Transformer EZ Indoor Timer DEKOR Transformer includes: TOOLS NEEDED Power Drill 1/2” Forstner Bit (1.
PAGE 2
Planning: SOFFIT LED LIGHTING INSTALLATION NOTE: Prior to installation supply, timer, and dimmer. These need to be accessible. A GFCI outlet is required to help prevent damage to lights due to electrical incidents. Live wiring installation (install with connected/activated lights) is recommended to ensure complete connection and functionality. 1. Determine location of power source (external/interior outlet). 1. Plug the timer into a GFCI outlet located in a dry area. 2.