Installation Guide

To activate your new solar post cap:
• Remove top by pressing inward on the side
of the clear lens, grasping the edge of the top
and lifting it off.
• Install the batteries.
• Replace top by snapping onto side panels.
(Ensure the holes in the sides are matched up
with the stubs on the top.)
• Place your solar post cap in direct sunlight for
24-48 hours to fully charge.
To attach your post cap to the post, apply
exterior-grade construction adhesive to the
underside of the post cap before placing
the cap firmly on the post.
www.postcaps.com
Your solar post cap light is now ready to be installed onto your post.
PRESS TO
REMOVE
TOP
©2010 Universal Forest Products, Inc. All rights reserved. Maine Ornamental is a registered trademark of Universal Consumer Products, Inc., in the U.S.
4958_8/10
For more information, view our Web site at www.postcaps.com