Instructions / Assembly

Step 1.
Identify where the rock will be
placed and which direction fits
best for your application as well
as best visual appeal obtained by
rock placement.
Step 2.
Test fit rock in place over object
to be covered. Remove and pull
back decorative stone or mulch
from area the rock will cover.
Step 3.
Remove stake kit from inside
Mock rock. Reposition Mock
Rock into acceptable location
over object to be covered.
Step 4.
Install plastic stakes or optional
anchors through stake flange
locations until flush at the
flange.
Step 5.
Replace mulch and or decorative
stone over the base of the rock as
well as over the stake flanges.
Dekorra Mock Rock
Installation Instructions
Parts List
1 Dekorra Mock Rock artificial rock enclosure
1 Installation stake kit (located inside rock)
Dekorra Products
888-635-8585
[e-mail]