Instructions / Assembly

Step 1.
Identify where within the landscape the raised Garden Box will be positioned.
Step 2.
Determine a clear and level location that measures at least the minimum space of 70” x 50” to
allow for access to Garden Box.
Step 3.
Drill 8 drainage weeping holes within side walls approximately 1” from base. One hole in each
corner and 2 on each 62” long side wall again 1” from base.
Step 4.
Place drainage media such as coarse gravel, pea gravel, peat moss or perlite into base of Gar-
den Box.
Step 5.
Complete by filling with desired planting mix such as potting soil and plant.
Cleaning and Care
Polyethylene construction is typically stain and solvent resistant. To clean surface rinse with
water and use mild soap and a soft nylon brush to remove dirt and or deposits.
40210-GARDEN BOX
I N S T A L L A T I O N I N S T R U C T I O N S
Parts List
1 ea 210 Garden Basin 62”L x 46”W x 16”H
Tools Required
Cordless Drill 1/2” Drill bit
16 cubic feet potting soil and or planting media
3/4” cubic foot of coarse gravel