Instructions / Assembly

INDUSTRIAL BRACKET SHELF

24 & 36 INCH BOARD

STEP 1

At desired spot on your wall, using a level align the Industrial bracket

and mark top & bottom holes, measure to 16”or 32” on center

(depending of shelf size), with the second Industrial bracket using a

level align and mark top & bottom holes.

PAGE 1
INDUSTRIAL BRACKET SHELF 24 & 36 INCH BOARD STEP 1 At desired spot on your wall, using a level align the Industrial bracket and mark top & bottom holes, measure to 16”or 32” on center (depending of shelf size), with the second Industrial bracket using a level align and mark top & bottom holes.
PAGE 2
STEP 2 Pre-drill a pilot hole using a 11/64 drill bit. *(We recommend using a stud finder to make sure the Industrial bracket is secured into a wall stud) Mount Industrial bracket to the wall using a supplied #14, 3” phillips head screw. STEP 3 Center shelf on top of wall mounted brackets. Use the supplied 1” #14 phillip’s head screw to secure the shelf to the bracket.