Instructions / Assembly

3-TIER SHELF

HANGING INSTRUCTIONS

STEP 1

At desired height using a level to make sure the bracket is level, place the

back side of the the 3-Tier bracket to the wall and mark each of the 4 holes

for each bracket. At each mark, either on a stud or using the supplied

drywall anchor and the 2” #6 phillip’s head screws, mount the brackets to

the wall. Tighten each screw until secure (do not over tighten).

PAGE 1
3-TIER SHELF HANGING INSTRUCTIONS STEP 1 At desired height using a level to make sure the bracket is level, place the back side of the the 3-Tier bracket to the wall and mark each of the 4 holes for each bracket. At each mark, either on a stud or using the supplied drywall anchor and the 2” #6 phillip’s head screws, mount the brackets to the wall. Tighten each screw until secure (do not over tighten).
PAGE 2
STEP 2 Take one of the 2x6 shelves and using the pre-drilled holes and slide the shelf onto the pegs.