Installation Guide

ManualsBrandsDelaney Hardware ManualsDoor HardwareZW300 SmartHome Chrome Single-Cylinder Deadbolt 1-Cylinder Electronic Deadbolt Lighted Keypad Touchscreen Built-In Z-Wave

1

2

3

4

5

6

7

8

9

4

3

4

5

2 3/4" (70 mm)

3. Latch Backset Adjustment

Determine if the latch (D) needs to be adjusted

to the 2 3/4" (70 mm) backset.

To adjust, rotate the latch until it stops.

Reverse the direction to return to the

2 3/8" (60 mm) backset.

4. Mark the Door with Template

Select the height and backset as desired on

the door face; use the TEMPLATE as an

indication to mark the centre of the circle on

the door face and the centre of the door

edge.

5. Drill Holes

Using the marks as a guide to drill a hole

Ø2 1/8" (54 mm) through the door face for

the lockset, then a hole of Ø1" (25.4 mm)

for latch.

D

ASSEMBLY INSTRUCTIONS