Installation Guide
Contemporary Square Sliding Door Lock
Installation Instructions
Read this guide thoroughly before installation and follow the instructions.
This product is designed for lightweight interior doors. Do not use it on exterior or heavy metal doors.
Entry
Privacy
:35 mm~55 mm
:31 mm~51 mm
Door Thicknesses
Entry
Select the length of mounting screws
based on the thickness of the door.
Door thicknesses
Length of mounting screw
31~35 mm
35~40 mm
40~45 mm
45~55 mm
12 mm
18 mm
22 mm
28 mm
Tailpiece l
(Entry)
engths
35~41 mm
41~48 mm
48~55 mm
Length
23 mm
31 mm
39 mm
Mark Door with Template
45 40 35 31
55
Caution: Drill from both
faces of the door to
prevent door cracking.
Right-handed door
STRIKE TEMPLATE
31 36 mm~
36 44 mm~
44 51 mm~
29 mm
37 mm
45 mm
34
22
52
67
Fold the paper guide and place it on the corner
of the door 914 mm from the floor.
Make markings on the face and side of the door
with the holes on the paper guide.
face of the door and the 25 mm diameter latch
bolt hole on the side of the door as indicated by
the markings.
Drill the 54 mm-diameter lock body hole on the
(Unit:mm)
60
54
4
25
58
26
Drill Holes
Privacy
Door thicknesses
(Privacy)
Length
Door thicknesses
Make 25 mm hole at center
of door edge.
TEMPLATE
Fold on dotted line and fit on door edge
FOR BACKSET 60mm
Ø54mm
26