Installation Guide
3. Chisel the Pull & Hinge Recess Areas 4. Install the Door Pull
A. Next, using the
1
/4” Chisel remove
the small area of wood above the top
hole for the finger pull barrel hinge
housing.
B. With the
1
/2” Chisel remove the
wood between the two lower holes
so the finger pull could move freely in
and out of the door.
(See below Door Detail for mortise depth
and width)
After removing all the
leftover material, place the
finger pull where it should
sit to test fit and make sure
it will move freely.
Secure into position
using the supplied
screws.
Now you will be able to
easily use your pocket door
lock with edge pull.
US-DELANEY 3/2020-DELANEY
5/16"
3/8"
7/8"
2-3/32"
1"
DRILL 3/4" DIA.
DRILL 2
HOLES
11/16" Dia.
CHISEL 5/16" DEEP
7/16" DEEP
(DRILL)
1/8"
MORTISE
1-3/4"
DEEP
DOOR DETAIL
1
/4”
Chisel
A
1
/2”
Chisel
B