Installation Guide

3545
1-3/8"1-3/4"
Mark 25.4mm (1") hole at center of
door edge.
A. Use wrench furnished to turn loose
set screw.
B. Pull out and changs side of interior
lever and exterior lever.
C. Assemble both levers again.
NOTE:
Be sure to have set screw face downward.
Privacy leverset is for bed/bathroom doors.
Push button on inside rose to lock both levers.
Emergency unlocking from outside by pushing button through
hole on outside rose.
Passage leverset is for hall/closet doors where no locking is
required.
Depress lever to latch door.
7. CHANGE HANDING OF CURVED LEVER
8. INSTALL PRIVACY LEVERSET 9. INSTALL PASSAGE LEVERSET
(A)
(B) (C)
WRENCH
SET SCREW
FACE
DOWNWARD
SPINDLE
SCREWS
LATCH
INSIDE ROSE
MOUNT SCREWS
STEM
EXTERIOR LEVER
INSIDE LEVER
MOUNT SCREWS
SCREWS
SPINDLE
STEM
LATCH
INSIDE ROSE
PUSH BUTTOM
EXTERIOR LEVER
INSIDE LEVER
Fold here on door edge
TEMPLATE
BACKSET ( )2-3/4" 70mm
BACKSET ( )2-3/8" 60mm
54mm(2-1/8")
AD1
AD1
AD1
AD1
40
1-9/16"
EMERGENCY UNLOCKING HOLE
OUTSIDE ROSE OUTSIDE ROSE
LEVER
KNOB