Installation Guide

INSTALLING THE ANTI-JUMP DISCS
Position each anti-jump disc at least 1” from the edge of the
hangers. Tighten slightly to secure in place.
HANG THE DOOR
Place assembled door on secured track. Tighten the anti-jump
discs. Slide door from open to close to ensure all parts are
operating smoothly. Secure stops in desired positions with
allen wrench.
INSTALLING FLOOR DOOR GUIDE (Optional)
Once the door is plumb, place the floor door guide inside
the groove and line up close to the door opening. Slide the
door from open to close to insure working order. Mark
holes with a pencil. Pre-drill ¼” holes. If mounting into a
concrete floor, use provided anchors.
5
6
7
1 3/16"
1/4"
BARN DOOR HARDWARE KIT
ASSEMBLY INSTRUCTIONS
COMPLETED DOOR WITH BARN DOOR KIT
**Note that these instructions depict the installation of
Delaney Hardware 1000 Series Barn Door Kits. While hanger
styles may differ, the same basic instructions will apply.
For questions about installation, please visit
www.delaneyinc.com/barndoorinstructions.asp
Or call [phone]
Step 2
For the 2000,
5000, and 6000
Series, please refer
to the following
images for Step 2
of the instructions.