User's Manual

Operation
ALPRO ver 6.60/ Activity meter system
94118201.pdf2006-11-08
GROUP SELECTION
ENTER GROUP: 0
PRESS “0” FOR ALL GROUPS
COMBINATION: NO
✽
GROUP SELECTION B
ENTER GROUP: 0
PRESS “0” FOR ALL GROUPS
COMBINATION: NO
GROUP SELECTION 2
ENTER GROUP: 0
PRESS “0” FOR ALL GROUPS
COMBINATION: NO
In function 7: GROUP SELECTION (found
in the main menu), a specific group (or a
combination of groups) can be selected so it
will comprise only this group (or groups) of
cows. Before pressing the numeral keys for
desired printing, group (or combination of
groups) is selected in function 7. All groups
are included in the lists by programming 0.
Note! The asterisk in the upper right corner
of the display tells that 0, i.e. all groups has
been programmed. If one group is
programmed in function 7, the group
number will be given instead. If a
combination of groups has been selected, a
letter (A, B, C, or D) will be given.
Usually, 0 is selected in this function, i.e.
lists with data on all cow groups, each time
a list is printed.
To keep up tag numbers
CORRECT COW /TAG
COW NO: 285 1285
UNKNOWN TAGS
TAG NO:
123 234 345 567 789 1284
✽
The display shows that cow no 285 is not active. Her
tag no is 1285. Tag no 1284 is shown among the
unknown tags. This is probably a typing error, which
is easily corrected by changing the Tag No to 1284.
1:2:5 CORRECT COW/TAG
This display makes it possible to find and
correct cows with wrong tag numbers in the
ALPRO system.
If a cow in the herd shows no activity, the
most probable explanation is that she is
programmed in ALPRO with a wrong tag
number. If there, at the same time, are tags
not programmed to any cow (unknown
tags) that indicate activity, the right tag
number is probably found among the
unknown tags.
Cows showing no activity - 24 or 48 hours
no sending alarm and cows with 0 activity
the last 24 hours - are presented on this
display together with the numbers of
unknown tags.
To work with the display: Choose Cow No
or Tag No with the right and left arrows.
Scroll the cow numbers by pressing ENTER
and the Unknown tags with the up and
down arrows. Change to the correct Tag No
by editing it in the Tag No square and press
ENTER. When an Unknown Tag No is
connected to a cow, it will disappear from
the Unknown tag list.
31(60)