User's Manual

Operation
ALPRO ver 6.60/ Activity meter system
94118201.pdf2006-11-08
ACTIVITY YAG MODEACTIVITY YAG MODE
COW NO 1 GROUP NO: 1COW NO 1 GROUP NO: 1
TAG NO: 4567TAG NO: 4567
STATUS: STDBY 5 DAYSSTATUS: STDBY 5 DAYS
END DATE: 01.10.12END DATE: 01.10.12
The STDBY mode
STDBY (standby) mode is used for
suppressing activity alarms when a cow is
pregnant, or when there is no need for a
cow to give alarms. When setting the STBY
mode also set the number of days you want
the alarms turned off. Max 255 days. The
END DATE will show. After the number of
days has passed the activity tag returns to
WATCH mode.
CHANGE NOT ALLOWED. USE THE MAGNET TO
CHANGE TAG TO OR OFF MODE PRESS <ENTER>
AND TRY AGAIN
CHANGE NOT ALLOWED. USE THE MAGNET TO
CHANGE TAG TO OR OFF MODE PRESS <ENTER>
AND TRY AGAIN
The OFF mode
The tag can only be turned to OFF mode
with a magnet. If an operator tries to change
to OFF mode in the processor, the display
will show an error message.
36(60)