DeLaval milking automation BM213 BM204 IOM200 IOM400 CCM215 DM223 Instruction Book 1|P a g e Document number: Dnnnnnnnnnnnnnnn
Table of contents 1 Safety precautions 3 2 2.1 2.2 Regulatory FCC Statement ISED Canada Statement 6 6 6 3 General description 7 4 4.1 4.2 4.3 4.4 4.5 4.
1 Safety precautions DeLaval milking automation, BM213 BM204 IOM200 IOM400 CCM215 DM223 1. Note to operator It is the operator's responsibility to see that any person involved with the use or operation of this equipment follows all safety and operational instructions. Under no circumstances should this equipment be used if the equipment is faulty or the operator does not completely understand the operation of the equipment. 2.
. Safety regulations 4 (12)
. Safety labels on the equipment 5 (12)
2 Regulatory 2.1 FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
3 General description The milking automation family (currently) consist of the modules BM213, BM204, IOM 200, IOM400, CCM215, DM223. All units have the same technical base, when it comes to supply voltage (24V DC), physical dimensions and mechanical interface (footprint). All devices in the family are equipped with a blue tooth radio (BLE 4.2) and all modules have the same environmental class, IP56 However all modules have their area of use. 4 Function description 4.
BLOCK SCHEMATIC CYPRESS PSoC4 WITH BLE RADIO Not valid for SPM006 4.2 Technical Data BM213, BM204, IOM 200 The BM213 IOM200 and BM204 are based on the same electronic board and design (PCBA), differences are within the setup of buttons and application software. All I/O and interfaces are the same. Name I/O Buttons BM213 12 Input/output channels, BLE radio 1 large 3 small BM204 12 Input/output channels, BLE radio 4 small IOM200 12 Input/output channels, BLE radio None 4.
Name DM223 4.4 I/O 12 Input/output channels, BLE radio MMI 3 Touch buttons and a B/W display Technical Data IOM400 The usages IOM400 is controlling different motor applications, typical feeding applications. Name IOM400 4.5 I/O 12 Input/output channels, BLE radio MMI None CCM215 The CCM215 are used for linking local buses (Lin bus) from multiple modules, typical on 1 bus you connect 3 pcs. of BM213 modules + 3 pcs. of IOM200 + 3 pcs.
4.
DM223 BM204 11 (12)
Picture of the back of the modules IOM200/IOM200 5 CCM215 BM213/BM204/DM223 Standards RED 2014/53/EU Annex 5 Electromagnetic Compatibility Radio Characteristics Information technology equipment – Safety FCC IC, Canada EN 301 489-01:V2.1.1 (2017-02) EN 301 489-17:V3.1.1 (2017-02) EN 55032:2012 + AC:2013 ETSI EN 300 328 v2.1.1 (2016-11) IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013 FCC Part 15.
