Specifications
35
Specication Line
Standard Labor Guidelines To Repair Or Replace Parts On Delfield Equipment
Advice and recommendations given by Delfield Service Technicians do not constitute or guarantee any special coverage.
•Amaximumof1-hourisallowedtodiagnose a defective component.
•Amaximumof1-hourisallowedforretrieval of parts not in stock.
•Amaximumtravel distance of 100 miles round trip and 2-hours will be reimbursed.
•Overtime,installation/start-up,normalcontroladjustments,generalmaintenance,glassbreakage,freightdamage,and/or
correcting and end-user installation error will not be reimbursed under warranty unless pre-approved with a Service Work
Authorization from Delfield. You must submit the number with the service claim.
Labor Of 1-Hour Is Allowed To Replace:
•Thermostat • Contactor/Relay
•DoorJambSwitch • Evaporator/CondenserFanMotorandBlade
•SolenoidCoil • CirculatingFanMotorandBlade
•Hi-limit/ThermalProtectorSwitch • MicroprocessorControl
•FanDelay/DefrostTerminationSwitch • Transformer
•CompressorStartComponentsandOverloadProtector • DoorHinges,Locks,andGaskets
•DefrostTimer • CondensateElement
•Thermometer
Labor Of 2 Hours To Replace:
•DrawerTracks/Cartridges • DefrostElement
•PressureControl • HeatingElement
•SolenoidValve • Locate/RepairLeak
Labor Of 3 Hours To Replace:
•EPRorCPRValve • CondenserorEvaporatorCoil
•ExpansionValve
Labor Of 4 Hours To Replace:
•Compressor
This includes recovery of refrigerant and leak check.
$55.00 maximum reimbursement for refrigerant recovery (includes recovery machine, pump, torch, oil, flux, minor fittings,
solder, brazing rod, nitrogen, or similar fees.)
Refrigerants:
•R404AAmaximumof$15.00/lb.or$1.00/oz.willbereimbursed.