User's Manual
Table Of Contents
Quick Installation Guide Access the APC 2M-14
deliberant Page 11
Access the APC 2M-14
The first connection to the APC 2M-14 can be made using a standard Ethernet cable connected
directly to your PC. See next sections for the instructions on how to access the APC 2M-14
management interfaces.
Connection via WEB browser
The default IP address of the APC 2M-14 is 192.168.2.66 with a subnet mask of 255.255.255.0.
Step 1. Configure your PC with a static IP address on the 192.168.2.0 subnet with mask
255.255.255.0. Connect the APC 2M-14 Ethernet interface in to the same physical
network as your PC. Open the Web browser and type the default IP address of the
APC 2M-14: https://192.168.2.66/
Step 2. Enter the APC 2M-14 administrator login details to access the Web management:
The default administrator login settings for all APC 2M-14 are:
Login: admin
Password: admin01
Step 3. After successful administrator log on you will see the main page of the APC 2M-14 Web
management interface. The APC 2M-14 now is ready for configuration. For further
instructions on Web management refer to the respective document APC 2M-14 User
Guide.