User's Manual

Quick Installation Guide Installation
deliberant Page 11
Step 5. For the pole mounting attach APC 2S-20 unit on pole with two U bolts in a required
position and tighten with the hexagon M6 nuts and spring washers (items F, P and S in
the Figure 1 – APC 2S-20 Package Contents):
Step 6. Place a rubber seal (item L in the Figure 1 – APC 2S-20 Package Contents) on the
UTP cable and insert it into the mounting bracket’s hole:
Step 8. Connect power adapter into PoE injector together with UTP cables as displayed in the
picture below:
It is recommended to use shielded Ethernet cable to reduce exposure of the
electromagnetic noise.